SmartMist is a proven designed unit, that’s easy to install or to be retrofitted to provide an effective 100% evaporative air pre-cooling system. We take an approach in design and engineering to take full advantage of the power of misting to drastically pre-cool the space that will increase the efficiency of gas turbines by condensing and cooling the inlet air.
Using high pressure that will 100% evaporative mist that is controlled by our series of automated and manual controlled integrated into our HP Smart Pump system. Which allows the pre-cooling to only be activated when needed, which will condense the intake air so that the turbine can work efficiently all year round at peak performance. Providing an extremely fast ROI (measured in weeks, not years) because of the improved output, during the peak demand of hot summer days.
Built together with a series of high pressure pumps (1000 – 2000 PSI), each unit is designed to meet the cooling load required for each individual tower. This can be anywhere from a few to hundreds of GPM (gallons per minute) depending on the size of the tower and its demands of the climate.
The controls are designed to allow for a full automatic and manual control, which allows each system to meet various cooling demands such as climate without the waste or water and other resources.
The HP Smart Array is a series of designed high pressure nylon and/or stainless steel mist runners and nozzles designed for your Dry Cooling Tower’s size and environmental conditions. With each run including up to hundreds of nozzles the can be tired together through a series of manifolds to individual or multiple pumps depending on the controlled needed for each particular spaces. To maximise their efficiency each fit out we carefully position our product to insure the least amount of resources are used whilst it’s running.